Top 5 Best Car Amplifiers for Subwoofers

(1) Alpine S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D. (1) Alpine RUX-KNOB.2 Remote Control Bass Knob For Select Alpine Amplifiers Amps. Specifications:

Alpines Class D Amplifier Circuit. CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V 1% THD+N); 600W RMS x 1 (2ohm, 14.4V 1% THD+N)

S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm). THD+N 0.03% (ref 1W info 4 ohm). Frequency Response: 10Hz-400Hz (+/-3 dB). Damping Factor: > 1000

Remote bass knob compatible (requires RUX-KNOB.2, sold separately)

Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers

Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Specs - Dimensions: 9.13” x 10.44” x 2.25”, Weight: 4.43 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 30 Amp ATO Blade

Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality

Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.

800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.

Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.

Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.

Thermal Protection Circuit, Short Protection Circuit.

Overload Protection Circuit. Phase Switch: 0° or 180°.

Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.

Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz. Frequency Response: 20Hz - 150Hz. Sensitivity: 90dB @ 1w / 1m.

Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches.

Note: Kindly refer User Manual before use

Power - 550 Max x 4 @2-Ohms, 275 Max x 4 @4-Ohms, 1100 Max x 2 Bridged @4 Ohms

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)

Specs - Dimensions: 17” x 10.31” x 2.25”, Weight: 12.53 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 103 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 2 40 Amp ATO Blade

BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Loaded Sub Enclosure Features: Final Impedance: 2 Ohm, Peak Power Handling: 2800 Watts, CEA-2031 Compliant RMS Power Handling: 700 Watts, ¾” MDF enclosure, Bonded stapled and braced, Computer designed vents, Angled at 15 % for perfect bass alignment

2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire, The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire, 50 Oz High Quality Magnet

Amplifier Features: Rockville dB12 2000 Watt/500w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp, CEA Compliant Power Ratings (Rated at less than 1 % distortion)

RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.), - 2 Ohm: 1000 Watts x 1 Channel, - 4 Ohm: 600 Watts x 1 Channel

Amp kit features: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable, 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables, 17’ – 18 Gauge Blue Remote Cable, 17’ – 16 Gauge Clear Speaker Wire, 3’ – 4 Gauge Clear SuperFlex Ground Wire

POWER - 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms

VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Hifonics ZG-2400.1D Class D Amplifier + Gravity Magnet Phone Holder Bundle

Power Rating: 4 Ohms: 600 Watts x 1 2 Ohms: 1200 Watts x 1 1 Ohms: 2400 Watts x 1

Tone Control/Parametric EQ: Built-in bass control | PWM MOSFET Power Supply

Electronic Equalizer | Onboard Electronic Crossover | High Level Input

Dimensions: 10.875"L x 8.25"W x 2.375"H | Bass Remote Included

Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit

Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design.

Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers.

1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B.

17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder

Power - 300 Max x 2 @ 2 Ohms, 150 Max x 2 @ 4 Ohms, 600 Max Bridged x 1 @ 4 Ohms

Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers

Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

Fixed High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. The High-Pass Crossover gears specifically towards “highs” in all size speakers including mid ranges and tweeters

Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)

Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Specs - Dimensions: 9.16” x 10.44” x 2.25”, Weight: 4.25 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 35 Amp ATO Blade

Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality

2 Ohm Stable Operation & Soft Turn On Circuit

Thermal and Speaker Short Protection Circuitry

Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation

Remote Turn-On / Turn-Off Circuit

LED Power and Protection Indicators